Revise README for E8257D MATLAB Driver

Updated README to provide detailed information about the E8257D MATLAB Instrument Driver, including requirements, installation instructions, quick start guide, API reference, and notes.
2026-02-25 01:10:46 -05:00 · 2026-02-23 02:06:45 -05:00
parent 0687933cb8
commit 5f0ec9552d
1 changed files with 125 additions and 2 deletions
--- a/README.md
+++ b/README.md
@@ -1,2 +1,125 @@
-# Agilent-Keysight-E8257D-MATLAB-Library
-MATLAB class to controll the Agilent/Keysight E8257D PSG signal generator
+# E8257D — MATLAB Instrument Driver
+
+A MATLAB class for controlling the **Agilent/Keysight E8257D PSG Analog Signal Generator** over a TCP/IP VISA connection. Provides a simple, object-oriented interface for configuring RF output power, frequency, modulation, and instrument state.
+
+---
+
+## Requirements
+
+- MATLAB with the **Instrument Control Toolbox** (R2021a+ recommended for `visadev`)
+- The E8257D must be accessible on the **local network** with a known IP address
+
+---
+
+## Installation
+
+1. Clone or download this repository.
+2. Add the folder to your MATLAB path:
+   ```matlab
+   addpath('/path/to/E8257D');
+   ```
+
+---
+
+## Quick Start
+
+```matlab
+% Connect to the instrument by IP address
+psg = E8257D('192.168.1.100');
+
+% Set CW frequency to 1 GHz
+psg.setCWFrequency(1e9);
+
+% Set output power to -10 dBm
+psg.setRFPower(-10);
+
+% Enable RF output
+psg.setOutput(true);
+
+% Disable and clean up when done
+psg.setOutput(false);
+psg.deInit();
+```
+
+---
+
+## API Reference
+
+### Constructor
+
+```matlab
+obj = E8257D(ip_addr)
+```
+
+Connects to the instrument at the given IP address via TCPIP/VISA, clears the error queue, and disables modulation on startup.
+
+| Parameter | Type | Description |
+|---|---|---|
+| `ip_addr` | `string` | IP address of the instrument (e.g. `'192.168.1.100'`) |
+
+---
+
+### RF Configuration
+
+```matlab
+psg.setCWFrequency(freq)
+```
+Sets the CW output frequency in Hz.
+
+```matlab
+psg.setRFPower(powdBm)
+```
+Sets the output power level in dBm.
+
+```matlab
+psg.setOutput(bool)
+```
+Enables (`true`) or disables (`false`) the RF output.
+
+```matlab
+psg.setModulation(bool)
+```
+Enables (`true`) or disables (`false`) the modulation output. Modulation is **disabled by default** on instantiation and on `deInit()`.
+
+---
+
+### Instrument Control
+
+```matlab
+psg.reset()
+```
+Sends `SYST:PRES` to restore the instrument to its preset state.
+
+```matlab
+psg.waitUntilDone()
+```
+Polls `*OPC?` until the instrument reports all pending operations are complete. Times out after 10,000 iterations with a warning.
+
+```matlab
+rsp = psg.sendResp(cmd)
+```
+Sends a SCPI query and returns the response string.
+
+```matlab
+psg.sendCommand(cmd)
+```
+Sends an arbitrary SCPI command with no return value.
+
+```matlab
+psg.deInit()
+```
+Resets the instrument, disables modulation, and releases the VISA connection. Returns `1` on success, `0` if the connection was already invalid.
+
+---
+
+## Notes
+
+- Uses MATLAB's `visadev` interface (introduced in R2021a). If you are using an older version of MATLAB, you will need to adapt the constructor to use the legacy `visa()` function instead.
+- The error queue is checked during construction via `SYST:ERR?` but the response is not currently validated — extend this if stricter error handling is needed.
+- `deInit()` should always be called when finished to cleanly release the instrument.
+
+---
+
+## License
+
+MIT License — see [LICENSE](LICENSE) for details.